S Type Rotating Joint

料號：CD-SJ (S)

商品簡述

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

S Type Rotating Joint

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

Size	Model	Material		A±5 (mm)	B±5 (mm)	Flange specifications and type Exterior coating selection
Size	Model	Carbon steel	Stainless steel	A±5 (mm)	B±5 (mm)	Flange specifications and type Exterior coating selection
2”	CD-SJ50(S)	√	√	230	115	Specifications: □ ANSI 150# □ JIS 10K □ Other ________ Type: □ RF □ FF Coating: □ Red □ Yellow □ Other ________
2.5”	CD-SJ65(S)	√	√	263	133
3”	CD-SJ80(S)	√	√	293	146
4”	CD-SJ100(S)	√	√	361	178
6”	CD-SJ150(S)	√	√	454	242

S Type rotating joint

Model	CD-SJ (S)
Water inlet/outlet joint type	ANSI 150# or JIS 10K FF or RF flange
Designed pressure	150～225PSI （10.5～15.8 kgf/cm²）
Operating pressure	100～180PSI （7～12.3 kgf/cm²）
Test pressure	355PSI （25 kgf/cm²）
Material	1. Body: Carbon steel or stainless steel SUS304 2. O-ring: NBR 3. Ball bearings: Stainless steel SUS304
Coating	Yellow or red; other colors are available based on customer demand

S Type Rotating Joint

S Type Rotating Joint

S Type Rotating Joint

S Type rotating joint

Related Products

C Type Rotating Joint

E Type Rotating Joint

F Type Rotating Joint